国内外催化裂化降硫助剂研究现状及展望

总结了国内外用于催化裂化装置的具有降低催化裂化汽油硫含量作用的助剂及其材料的研究状况,重点介绍了目前催化裂化过程中使用的降硫助剂的脱硫率及其对催化裂化产品分布的影响等.同时指出,采用高效降硫材料直接添加于催化裂化装置,既不影响裂化产品分布和质量,又能有效地降低催化裂化汽油硫含量,是未来降低汽油硫含量的一个有效途径.     

浅层超稠油热采杜84-平28井设计与实钻技术

曙一区杜84块是辽河油田超稠油难采储量中规模较大的具有代表性的区块，开发中存在注汽困难、生产周期短、油井作业频繁热损失大、地层普遍出砂、综合成本高、开采难度大等一系列问题。根据油藏生产动态和综合分析油藏地质参数，结合油藏特征及原井网开发状况，通过对杜84-平28井优化设计和精心组织施工，重点对施工中产生的主要问题进行分析，采取科学合理的技术措施，取得显著的开发效果。     

岩石圈深部温度压力条件下褐煤与水的热模拟研究

在压力高达1—3GPa、温度为400—700℃的条件下，在密闭体系中进行了褐煤加水的模拟实验。分析了实验产物中液态烃的变化规律，并讨论了压力、温度及恒温时间对有机质演化的影响。实验结果表明，热模拟液态产物氯仿沥青“A”的有机碳含量为0．91％-2．55％，2GPa条件下其高峰值后移至700℃，说明高压抑制了液态烃的生成，同时压力升高有利于有机质降解产物的环化、聚合和芳构化。在400—600℃条件下，温度升高或恒温时间增长，OEP和Pr／Ph值均减小；而在700℃的恒温条件下，压力增高，OEP和Pr／Ph值均增大。说明有机质的成熟度与温度和加热时间成正相关，而压力增加抑制了有机质的成熟演化。在高压条件下，芳烃演化的主要趋势是甲基化作用，压力升高有利于甲基化反应和甲基重排。     

TEM Studies of High Temperature Corrosion Behaviour of TiAl Intermetallics with Surface Modifications

The oxidation/sulphidation behaviour of a Ti‐46.7Al‐1.9W‐0.5Si alloy with a TiAl₃ diffusion coating was studied in an environment of H₂/H₂S/H₂O at 850^oC. The kinetic results demonstrate that the TiAl₃ coating significantly increased the high temperature corrosion resistance of Ti‐46.7Al‐1.9W‐0.5Si. The SEM, EDX, XRD and TEM analysis reveals that the formation of an Al₂O₃ scale on the surface of the TiAl₃‐coated sample was responsible for the enhancement of the corroison resistance. The Ti‐46.7Al‐1.9W‐0.5Si alloy was also modified by Nb ion implantation. The Nb ion implanted and as received sampels were subjected to cyclic oxidation in an open air at 800^oC. The Nb ion implantation not only increased the oxidation resistance but also substantially improved the adhesion of scale to the substrate.     

基于Matlab和串口通信的ADC动态性能FFT测试法

高速ADC是数字电路系统中不可或缺的组成部分,其动态性能直接决定了系统性能的好坏.ADC的动态性能常用测试方法很多,但都较为复杂.提出了一种新的ADC动态性能FFT测试方法,该方法结合Matlab软件和串口通信两者优势,可以方便快捷地对ADC动态性能进行测试.最后给出了采用该方法对一包含ADC的数字电路系统的ADC动态性能实测结果.     

典型电子现金系统的分析及其安全需求

文章设计了一种电子现金系统,关键是对安全性、效率、成本等进行综合考虑。从这些方面入手,论文分析了三种典型的电子现金系统—D.Chaum方案、S.Brands方案和T.okamoto方案。然后,结合匿名通信协议,提出如何更好地满足顾客利用公开网络进行安全通信的需求。     

马西洼槽中南部区带综合评价

马西洼槽是饶阳凹陷的主力生油洼槽,它为任丘潜山构造带、南马庄构造带、八里庄构造带提供油源。马西中南部剩余资源量较大,勘探目的层系多、勘探领域广,有较大勘探潜力。通过层序地层学的研究、构造精细解释和地质综合评价认为,马西断裂构造带为构造—岩性复合圈闭发育带,南马庄构造带为地层—岩性圈闭发育带。下第三系Es3段为最有潜力的勘探层系。通过多种地震属性和地震反演技术的应用以及地震相分析,落实了一批构造、岩性—地层圈闭,为老油田的勘探找到了接替战场。     

Segmented polymer networks containing amino‐dendrimers

Polymer networks in which poly(propylene imine) dendrimers (Astramol?) are connected to each other by linear polytetrahydrofuran (polyTHF) segments, were prepared by two methods. The first method was a one‐step procedure in which bifunctionally living polyTHF, obtained by initiation of the THF polymerization with trifluoromethane sulfonic anhydride (triflic anhydride), was reacted with an amino‐dendrimer. This reaction was very fast but did not allow formation of the end products. The second method was a two‐step procedure. In a first step, living polyTHF, prepared with acryloyloxybutyl triflate as initiator, was grafted on an amino‐dendrimer, to form a star‐like, acrylate‐terminated polyTHF multi‐macromonomer with the dendrimer as core. In a second step, networks were obtained by Michael addition between the acrylate end‐groups and unreacted amino‐groups of the dendrimer. This cross‐linking reaction occurred spontaneously upon heating of the solution of the multi‐macromonomer with gelation times varying from a few minutes to a few hours, depending on the temperature and the composition of the prepolymers. With this method it was possible to prepare networks in the form of coatings or films. © 2003 Society of Chemical Industry     

An optimization model for placement of wavelength converters to minimize blocking probability in WDM networks

The introduction of wavelength converters in wavelength division multiplexing (WDM) networks can reduce the blocking probabilities of calls. In this paper, we study the problem of placing a given number of converters in a general topology WDM network such that the overall system blocking probability is minimized. The original contributions of this work are the following: 1) formulation of success probability in a network as a polynomial function of the locations of converters; 2) proposal of an optimization model of the converter placement problem as the minimization of a polynomial function of 0-1 variables under a linear constraint, so that standard optimization tools can be employed to solve the problem; and 3) design of a search algorithm that can efficiently find the optimal solution to the converter placement problem. Experiments have been conducted to demonstrate the effectiveness of the proposed model and the efficiency of the algorithm.     

16信道0.35μmCMOS/VCSEL光发射模块

研究了垂直腔面发射激光器 (VCSEL)及其列阵器件的光谱特性、调制特性、高频特性及与微电子电路的兼容性 ,将 1× 16的VCSEL与CMOS专用集成电路进行多芯片组装 (MCM ) ,混合集成为 16信道VCSEL光发射功能模块 .测试过程中 ,功能模块的光电特性及其均匀性良好 ,测量的 - 3dB频带宽度大于 2GHz.